A designer comparing velvet and leather swatches over a restaurant floor plan, with a marble chip and a brass sample on the table
The trade

Drawn to your set. Built to your schedule.

Shop drawings on every commission, your COM or COL, no minimums, and an install crew that works to your schedule.

Contact us
What we need

Enough to draw from.

  • Plan or sketch

    A floor plan with the seating marked, or a sketch with rough dimensions. Elevations if you have them.

  • Quantity

    Units or linear feet.

  • Material

    Your COM or COL by name, or a direction and we suggest from the library.

  • Dates

    Drawing approval, site ready, opening.

  • Site conditions

    Columns, outlets, sloped floors, wall finishes, freight access.

An upholsterer checking a finished blush velvet banquette with a tape measure on the workshop floor
What you get

Drawings first, then the piece.

  • Shop drawings on every commission

    Plan and elevation with every dimension, issued for your approval before we cut.

  • COM and COL yardage

    Confirmed on the drawings so you place the mill order once.

  • Samples

    Swatches from the library on request.

  • Field measurement

    We measure the room when the site is ready.

  • No minimums

    One booth or a rollout, the same process.

  • Phased delivery

    Across properties and across openings, on your program.

Standard specifications

The numbers you spec against.

  • Seat height18 in
  • Seat depth18 to 20 in
  • Back heights36, 42, 48 in
  • Seat spacing24 in per person
  • FrameBirch plywood grade, kiln-dried hardwood, glued and screwed
  • BasePowder-coated steel plinth with levelers

Any dimension can change on the drawing.

Questions

Before you write.

We reply within one business day. Or call (727) 935-1364.

Can you quote from photographs?

Usually. Send photographs of the room or an inspiration image with rough measurements and we can quote most pieces from that. Shop drawings follow once the design is agreed.

Do you accept my own fabric or leather?

Yes. Send your COM or COL and we confirm the yardage on the drawings before you place the mill order. The house library is there if you would rather choose from samples.

Do you work with designers and contractors?

Much of our work comes through interior designers, architects, general contractors and developers, built to their drawings and their finish schedules.

How long does a commission take?

It depends on the materials and the scope. The lead time is confirmed on your shop drawings, and rush schedules are possible on some pieces if you ask early.

Where do you deliver and install?

Anywhere in the United States. The atelier is in Clearwater, Florida, and we coordinate freight, delivery and white-glove installation from there.

Do you reupholster existing booths?

Yes. If the frame is sound we recover it in the material you choose, staged so the room stays open. Photographs and rough dimensions are enough to tell you whether it is the right call.
Continue

What we build to your set.

Send the drawing set. We will send back the shop drawings.

Contact usCall (727) 935-1364
Cookies and tracking

This site uses analytics and advertising cookies only if you allow them. Your quote request works either way. Browsers that send a Global Privacy Control signal are treated as a decline.

Inquire

Accessibility